v6 HotEnd Metal Parts Only - 1.75mm Universal

v6 HotEnd Metal Parts Only - 1.75mm Universal
Product Code: V6-175-MO
Availability: In Stock
£32.00

(Excludes VAT for UK/EU customers)

Qty: Add to Cart

Metal parts

  • 1 x Aluminium Heatsink (including an embedded bowden coupling where applicable)
  • 1 x Stainless Steel Heatbreak
  • 1 x Brass Nozzle (0.4mm)
  • 1 x Aluminium Heater Block

Fixings

  • 4 x Plastfast30 3.0 x 16 screws to attach the fan to the fan duct
  • 1 x M3x3 socket dome screw and M3 washer to clamp thermistor
  • 1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for temperature sensors. This means a new heater-block and thermistor cartridge will be supplied with the E3D-v6 as standard. For a full explanation read the sensor documentation page.

This kit is intended for those with some experience who may already have many parts included in the full kit to hand already. This kit requires extra parts such as electronics, wiring, etc to complete its functionality. 

If you are at all unsure as to whether you should order this or the full kit you should purchase the full kit as it contains all the parts required to create a functioning hotend.

There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Also Bought
These high-quality pneumatic push-fit couplings have a 1/8"  thread and screw directl..
£1.20
1 reviews

If you need to couple a 30mm fan to a 22.3mm cylinder then look no further! The beautiful new E..
£1.00

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for tempera..
£32.00

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for tempera..
£31.00
2 reviews

These pneumatic fittings have a brass metal body which is designed to provide a simple and cost effe..
£1.50