v6 HotEnd Metal Parts Only - 3.00mm Direct

v6 HotEnd Metal Parts Only - 3.00mm Direct
Product Code: V6-300-D-MO
Availability: In Stock
£31.00

(Excludes VAT for UK/EU customers)

Qty: Add to Cart

Metal parts

  • 1 x Aluminium Heatsink (including an embedded bowden coupling where applicable)
  • 1 x Stainless Steel Heatbreak
  • 1 x Brass Nozzle (0.4mm)
  • 1 x Aluminium Heater Block

Fixings

  • 4 x Plastfast30 3.0 x 16 screws to attach the fan to the fan duct
  • 1 x M3x3 socket dome screw and M3 washer to clamp thermistor
  • 1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for temperature sensors. This means a new heater-block and thermistor cartridge will be supplied with the E3D-v6 as standard. For a full explanation read the sensor documentation page.

This kit is intended for those with some experience who may already have many parts included in the full kit to hand already. This kit requires extra parts such as electronics, wiring, etc to complete its functionality. 

If you are at all unsure as to whether you should order this or the full kit you should purchase the full kit as it contains all the parts required to create a functioning hotend.

on
5 ( 5 / 5 )
Great Support and product : easy to mount and beautiful parts,Ty to Bonnie for support =)Works perfectly with K8200,no jam or others problems !print this E3D v6 30x30 Fan Cover : http://www.thingiverse.com/thing:607114 (for great style)and E3D's Fan!
on
5 ( 5 / 5 )
Very impressed... The V6 fit nicely into my Mendelmax 2 (replacing the J head)and the little things like the thermistor retainer and cartridge clamp make such a neat job of it. Assembly was a breeze and the print quality exceeds my expectations - I've now printed several small jobs and 2 larger 310x220mm ABS parts taking around 6hrs ea to complete - the head didn't falter (and strangely, warping issues have diminished). I ordered the metal parts only as I need 24v heater and fan - I simply ordered the 24v fan(s), shroud, screw pack etc. separately. (Though I received two screw packs). Cost worked out about the same.Very, very happy with it and the service was also terrific. (mmm, gummy bears ;)Highly recommended.Cheers, Tim.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Also Bought
These high-quality pneumatic push-fit couplings have a 1/8"  thread and screw directl..
£1.20
1 reviews

If you need to couple a 30mm fan to a 22.3mm cylinder then look no further! The beautiful new E..
£1.00

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for tempera..
£32.00

From mid-June 2016 E3D Hotends will transition to using a standard cartridge-type format for tempera..
£31.00
2 reviews

These pneumatic fittings have a brass metal body which is designed to provide a simple and cost effe..
£1.50