PCB Heated Bed MK2B 12v and 24v

PCB Heated Bed MK2B 12v and 24v
Product Code: E-HEATED-BED-MK2B
Availability: In Stock
£12.50

(Excludes VAT for UK/EU customers)

Qty: Add to Cart

These a great quality heated bed with a few extra features that you don't find on the more standard beds out there.

The first is that these are dual power and can be used with either 12v or 24v supplies, just choose the appropriate connection pads on the board.

A small hole in the very centre allows a thermistor to come through and be in direct thermal contact with the print surface so you can get the most accurate readings possible.

Finally there are 5 mounting holes, 1 at each corner, and another in the middle of one edge - this allows you to have either the more normal 4 point mounting, or alternatively a more easily levelled 3 point levelling system.

 

on
3 ( 3 / 5 )
This item does not come with any LED or resistor pre-soldered to the board, as indicated in the description.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Also Bought
These a great quality heated bed with a few extra features that you don't find on the more standard ..
£12.50
1 reviews

This is a bag of 40x Plastfast 3.0mm x 16mm screws.These screws have a special thread ..
£1.50