Honeywell 100kOhm NTC Thermistor in an axial package. (135-104LAF-J01)
See the Honeywell Website for more information if you require.
E3D HotEnd Compatibility:
On some of our heater blocks there is a hole for an axial thermistor. Be warned that this through-hole is nearer to the heater cartridge than the nozzle so can result in inaccurate nozzle tempreature measurements and is therefore not recommended.
- PTFE Heat Shrink (200mm)PTFE Heat Shrink for insulating cabling at high temperatur...£3.00 £3.60100k Ohm NTC Thermistor - SemitecSemitec 100kOhm NTC Thermistor for all your temperature-se...£3.50 £4.20Type K Thermocouple (Welded Tip)These thermoucouples can be used in place of your thermist...£10.00 £12.00Fibreglass Sleeving for Insulating Thermistors (100mm)Fibreglass sleeving is used in HotEnds for easy, neat, and...£0.25 £0.30Thermistor / Endstop Cable 2-Way with connector 1000mmA nice long (1000mm) thermistor or endstop cable.£0.80 £0.96PT100 Temperature SensorMake your HotEnd run at higher temperatures with better ac...£12.50 £15.00v6 Heater Block & Fixings (Thermistor Clamping)This is a replacement Heater Block designed for E3D V6 and...£9.00 £10.80V6 Heater Block for Sensor CartridgesThis heater block works with our new standard thermistor t...£11.50 £13.80V6 PT100 Total Upgrade KitPT100's are high temperature, high accuracy temperature se...£31.00 £37.20
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15