Orders including Titan products may incur a slight delay due to high demand

E3D Blog

  1. Hi, E3D here. We need to talk to you about groovemount.

    Hi, E3D here. We need to talk to you about groovemount.
    TL;DR: Groovemount is okay, but it's a hangover from when 3D printers were made in sheds. They aren’t any more, so we’re offering an alternative, using screw threads. If you think this would suit your printer better you can buy one here (1.75mm, suitable for bowden or direct systems). We’d also really like to get your feedback. Establishing a...
    Read more »
  2. Taking Cyclops and Chimera to the Next Level

    Taking Cyclops and Chimera to the Next Level
    We're proud to announce new and improved dual extrusion from E3D. Chimera+ and Cyclops+ are swappable HotEnds designed specifically for both air- and water-cooled dual extrusion.   Cyclops+ is a two-filament, one-nozzle HotEnd specifically designed to switch between two colours. There’s never an idle nozzle oozing while the other is printing (so there's no need for an ooze...
    Read more »
  3. Bringing an end to BearingGate: Improving Titan and Titan Aero

    Bringing an end to BearingGate: Improving Titan and Titan Aero
    After the unfortunate sequence of events which led to Bearing-Gate and following some serious stress-testing by the engineering team here at E3D, we're happy to announce that all Titan Extruder products (including Titan Aero), are back in stock with a complete bearing and lid solution . Briefly, here's a summary of what we've done: 1. Lids Lids have now...
    Read more »
  4. BearingGate: An engineering failure analysis

    BearingGate: An engineering failure analysis
    TL;DR: Some of our bearings in the Titan Extruder and Titan Aero have been failing due to a series of unfortunate events and we're really sorry about that. We have a solution to fix the problem on the way, and we'll be in a position to issue replacement parts in the next few weeks. Titan products shipping from now on...
    Read more »
  5. Water is Cool.

    Water is Cool.
    NB: We use the term ‘water’ interchangeably with ‘coolant’ throughout this blog post and, indeed, the product description. ‘Well which is it!?’ we hear you cry. Well it’s both, in that we recommend using a water-based coolant with Titan Aqua and the E3D water-cooling kit. You could use plain water and it would work, but it would also go mouldy...
    Read more »
  6. Battling Bowden Tube Physics

    Battling Bowden Tube Physics
    Those of you who've seen our new Gold V6 will have seen the swanky new Capricorn PTFE tubing and collet clips that it comes with. This blog post goes into more detail on the need for these upgrades, and how they work. TL;DR: We have a new high-performance bowden tube, and ways of making our tube couplings grip the tube...
    Read more »
  7. TCT 2017 - Behind the Scenes with E3D

    TCT 2017 - Behind the Scenes with E3D
    It’s mid October 2017 and here at E3D we can’t quite believe how fast the year’s flying by. With the launch of Titan Aero nearly 6 months ago, along with supplying our HotEnds to many open source 3D printer manufacturers (Lulzbot, Prusa, Dagoma to name a few), we’re delighted that the E3D ecosystem has become synonymous with reliable, high performance...
    Read more »
  8. Snap to it! With MatX and Scaffold Snap

    Snap to it! With MatX and Scaffold Snap
    Following the success of spoolWorks Scaffold and Edge, we're proud to bring you our newest optimised filament pairing: MatX and Scaffold Snap MatX is a drop-in-replacement for ABS applications that provides generally improved properties across the board, with increased layer adhesion and a much improved surface finish. Where ABS prints to a dull gloss, MatX has a lovely...
    Read more »
  9. Open Source, Design Patents, and E3D

    Open Source, Design Patents, and E3D
    Recently we’ve been taking another look at how we license our products here at E3D. There’ve been a few questions about licensing and what it means to be open-source as a hardware manufacturer, so we wanted to state our position clearly and openly for the benefit of all involved. The current process: E3D currently registers designs for most of its...
    Read more »
  10. Introducing T-Fill: Proper British tea from E3D

    Introducing T-Fill: Proper British tea from E3D
    At E3D we work hard to push the limits of what's capable with at-home 3D printing. With our range of professional and experimental filaments we go beyond what's expected in material extrusion.   T-Fill™ is not only the next step in filament innovation, but a loving homage to our homeland. As proud as we are of...
    Read more »

Items 1 to 10 of 26 total

Page

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15