Due to high demand your order will incur a delay whilst we work through our backlog
  1. Research and Development: Motion System and Tool-Changer

    Research and Development: Motion System and Tool-Changer
    We’ve been building a tool-changing 3D printer, and an incredible motion system to support it. TL:DR: We’ve developed a tool-changing 3D printer, which might just be the coolest thing to hit 3D printing in a very long time. We’ve built it on what we think is one of the best motion systems ever put on a printer. We want to...
    Read more »
  2. Hi, E3D here. We need to talk to you about groovemount.

    Hi, E3D here. We need to talk to you about groovemount.
    TL;DR: Groovemount is okay, but it's a hangover from when 3D printers were made in sheds. They aren’t any more, so we’re offering an alternative, using screw threads. If you think this would suit your printer better you can buy one here (1.75mm, suitable for bowden or direct systems). We’d also really like to get your feedback. Establishing a...
    Read more »
  3. Taking Cyclops and Chimera to the Next Level

    Taking Cyclops and Chimera to the Next Level
    We're proud to announce new and improved dual extrusion from E3D. Chimera+ and Cyclops+ are swappable HotEnds designed specifically for both air- and water-cooled dual extrusion.   Cyclops+ is a two-filament, one-nozzle HotEnd specifically designed to switch between two colours. There’s never an idle nozzle oozing while the other is printing (so there's no need for an ooze...
    Read more »
  4. Water is Cool.

    Water is Cool.
    NB: We use the term ‘water’ interchangeably with ‘coolant’ throughout this blog post and, indeed, the product description. ‘Well which is it!?’ we hear you cry. Well it’s both, in that we recommend using a water-based coolant with Titan Aqua and the E3D water-cooling kit. You could use plain water and it would work, but it would also go mouldy...
    Read more »
  5. Battling Bowden Tube Physics

    Battling Bowden Tube Physics
    Those of you who've seen our new Gold V6 will have seen the swanky new Capricorn PTFE tubing and collet clips that it comes with. This blog post goes into more detail on the need for these upgrades, and how they work. TL;DR: We have a new high-performance bowden tube, and ways of making our tube couplings grip the tube...
    Read more »
  6. Snap to it! With MatX and Scaffold Snap

    Snap to it! With MatX and Scaffold Snap
    Following the success of spoolWorks Scaffold and Edge, we're proud to bring you our newest optimised filament pairing: MatX and Scaffold Snap MatX is a drop-in-replacement for ABS applications that provides generally improved properties across the board, with increased layer adhesion and a much improved surface finish. Where ABS prints to a dull gloss, MatX has a lovely...
    Read more »
  7. Introducing T-Fill: Proper British tea from E3D

    Introducing T-Fill: Proper British tea from E3D
    At E3D we work hard to push the limits of what's capable with at-home 3D printing. With our range of professional and experimental filaments we go beyond what's expected in material extrusion.   T-Fill™ is not only the next step in filament innovation, but a loving homage to our homeland. As proud as we are of...
    Read more »
  8. Scaffold: More than just support? Experimenting with soluble moulds for composite parts

    Scaffold: More than just support? Experimenting with soluble moulds for composite parts
    It’s been a while since we blogged about something that’s just pure, unabashed, experimental geekery. As proud as we are of our products and as much as we love sharing them with you, we’re also tinkerers at heart. With this in mind, this blog post is about taking one of our established products (Scaffold) and pushing it to see what...
    Read more »
  9. Nozzles and blocks and hobbs, oh my!

    Nozzles and blocks and hobbs, oh my!
    As a special Christmas treat this week we're bringing you a triple-whammy of stocking filler product releases! Get your digits fiddling with E3D's new hardened hobbs, plated copper heater blocks, and nozzles. Note that we said plated copper, not copper plated! These blocks and nozzles are made of high temperature copper alloy and plated with non-stick nickel (and laser-engraved with the...
    Read more »
  10. Silicone socks: Cleaner nozzles and sharper prints

    Silicone socks: Cleaner nozzles and sharper prints
    Here they are, probably the most requested product we’ve released! Since the reddit thread where the enterprising amaurer3210 created his own and we showed off the first early prototypes of these we’ve had people clamouring for them. It took us by surprise! They took longer than expected as we had to learn an entirely new class of materials and manufacturing...
    Read more »

10 Item(s)

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715