1. E3D Tool-Changer and Motion System: Beta 30 incoming!

    E3D Tool-Changer and Motion System: Beta 30 incoming!
    Back in March we announced that we’ve been developing what might just be the coolest thing to hit 3D printing in a very long time, our tool-changing motion system! We opened up the opportunity for you to reserve a place in the queue and have been overwhelmed by the many hundreds of you that have expressed your interest in a project...
    Read more »
  2. My month as a special guest at E3D

    My month as a special guest at E3D
    It was January, I was home in snowy Sweden, everything as normal. A few of us were killing time, talking how to print big Benchys on Twitter, when E3D Online suddenly posted an image of some nozzles from their soon to launch Super-volcano HotEnd. Which promised to have 2-3x the flow of a standard Volcano, or up to 9x higher...
    Read more »
  3. Hi, E3D here. We need to talk to you about groovemount.

    Hi, E3D here. We need to talk to you about groovemount.
    TL;DR: Groovemount is okay, but it's a hangover from when 3D printers were made in sheds. They aren’t any more, so we’re offering an alternative, using screw threads. If you think this would suit your printer better you can buy one here (1.75mm, suitable for bowden or direct systems). We’d also really like to get your feedback. Establishing a...
    Read more »
  4. Taking Cyclops and Chimera to the Next Level

    Taking Cyclops and Chimera to the Next Level
    We're proud to announce new and improved dual extrusion from E3D. Chimera+ and Cyclops+ are swappable HotEnds designed specifically for both air- and water-cooled dual extrusion.   Cyclops+ is a two-filament, one-nozzle HotEnd specifically designed to switch between two colours. There’s never an idle nozzle oozing while the other is printing (so there's no need for an ooze...
    Read more »
  5. Water is Cool.

    Water is Cool.
    NB: We use the term ‘water’ interchangeably with ‘coolant’ throughout this blog post and, indeed, the product description. ‘Well which is it!?’ we hear you cry. Well it’s both, in that we recommend using a water-based coolant with Titan Aqua and the E3D water-cooling kit. You could use plain water and it would work, but it would also go mouldy...
    Read more »
  6. Battling Bowden Tube Physics

    Battling Bowden Tube Physics
    Those of you who've seen our new Gold V6 will have seen the swanky new Capricorn PTFE tubing and collet clips that it comes with. This blog post goes into more detail on the need for these upgrades, and how they work. TL;DR: We have a new high-performance bowden tube, and ways of making our tube couplings grip the tube...
    Read more »
  7. Snap to it! With MatX and Scaffold Snap

    Snap to it! With MatX and Scaffold Snap
    Following the success of spoolWorks Scaffold and Edge, we're proud to bring you our newest optimised filament pairing: MatX and Scaffold Snap MatX is a drop-in-replacement for ABS applications that provides generally improved properties across the board, with increased layer adhesion and a much improved surface finish. Where ABS prints to a dull gloss, MatX has a lovely...
    Read more »
  8. Introducing T-Fill: Proper British tea from E3D

    Introducing T-Fill: Proper British tea from E3D
    At E3D we work hard to push the limits of what's capable with at-home 3D printing. With our range of professional and experimental filaments we go beyond what's expected in material extrusion.   T-Fill™ is not only the next step in filament innovation, but a loving homage to our homeland. As proud as we are of...
    Read more »
  9. Titan Aero: What do you get if you cross a Titan with a V6?

    Titan Aero: What do you get if you cross a Titan with a V6?
    https://www.youtube.com/watch?v=xfpvm9z28Qk&w=560&h=315 Since smashing into the world of extruders with Titan back in March 2016 the next logical step for E3D was to integrate a Hot End into it, compress it as much as possible and make an ultra-compact all-in-one extruder and hotend. As with the original Titan, we came up with some design objectives before cracking on with prototyping...
    Read more »
  10. Nozzles and blocks and hobbs, oh my!

    Nozzles and blocks and hobbs, oh my!
    As a special Christmas treat this week we're bringing you a triple-whammy of stocking filler product releases! Get your digits fiddling with E3D's new hardened hobbs, plated copper heater blocks, and nozzles. Note that we said plated copper, not copper plated! These blocks and nozzles are made of high temperature copper alloy and plated with non-stick nickel (and laser-engraved with the...
    Read more »

Items 1 to 10 of 19 total

Page

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715