1. Hi, E3D here. We need to talk to you about groovemount.

    Hi, E3D here. We need to talk to you about groovemount.
    TL;DR: Groovemount is okay, but it's a hangover from when 3D printers were made in sheds. They aren’t any more, so we’re offering an alternative, using screw threads. If you think this would suit your printer better you can buy one here (1.75mm, suitable for bowden or direct systems). We’d also really like to get your feedback. Establishing a...
    Read more »
  2. Water is Cool.

    Water is Cool.
    NB: We use the term ‘water’ interchangeably with ‘coolant’ throughout this blog post and, indeed, the product description. ‘Well which is it!?’ we hear you cry. Well it’s both, in that we recommend using a water-based coolant with Titan Aqua and the E3D water-cooling kit. You could use plain water and it would work, but it would also go mouldy...
    Read more »
  3. TCT 2017 - Behind the Scenes with E3D

    TCT 2017 - Behind the Scenes with E3D
    It’s mid October 2017 and here at E3D we can’t quite believe how fast the year’s flying by. With the launch of Titan Aero nearly 6 months ago, along with supplying our HotEnds to many open source 3D printer manufacturers (Lulzbot, Prusa, Dagoma to name a few), we’re delighted that the E3D ecosystem has become synonymous with reliable, high performance...
    Read more »
  4. A Long-Awaited BigBox Update

    A Long-Awaited BigBox Update
    We've received countless emails over the past few months regarding BigBox, and while we are sorry for the delay in response, we were reluctant to make any announcements before everything was completely certain. This blog post is a big one, going into the good, bad, and unexpected challenges of the BigBox project. However in short: Commercially producing a machine was...
    Read more »
  5. Scaffold: A Soluble Support for Total Geometric Freedom

    Scaffold: A Soluble Support for Total Geometric Freedom
    https://www.youtube.com/watch?v=3VWd0IN7s9Q&w=854&h=480 We all know about the age-old overhang problem: The inability to print features that overhang beyond a certain angle.  Same-material breakaway supports are far from a perfect solution - even with some really great algorithms out there you’re still never going to be able to extract support out of an awkward internal cavity, or deep screw hole...
    Read more »
  6. Titan: The lightweight, easy-to-use extruder from E3D

    Titan: The lightweight, easy-to-use extruder from E3D
    [embed]https://youtu.be/Fcrz-_VzsQU[/embed] Objectives: As with all things at E3D, we came up with some design objectives before we started getting bogged down in the engineering. In no particular order this is what we wanted from our extruder: Have the filament pushing performance of a geared Greg-Wades extruder. We love these things, and have used them for years, the...
    Read more »
  7. Lite6: The low-cost, high-quality HotEnd for everyone!

    Lite6: The low-cost, high-quality HotEnd for everyone!
    Introduction We know that not everybody needs the all-metal high-temperature performance of an E3D-v6. We’ve come to realise that there exists a need for a hotend that is reliable, and puts out great prints, but meets the budget of those who are just getting started in 3D printing. £21.50!Lite6 is our answer to that need. By adopting a PTFE...
    Read more »

7 Item(s)

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715