Due to high demand, orders will incur a delay of around 1 week
  1. Water is Cool.

    Water is Cool.
    NB: We use the term ‘water’ interchangeably with ‘coolant’ throughout this blog post and, indeed, the product description. ‘Well which is it!?’ we hear you cry. Well it’s both, in that we recommend using a water-based coolant with Titan Aqua and the E3D water-cooling kit. You could use plain water and it would work, but it would also go mouldy...
    Read more »
  2. Titan Aero: What do you get if you cross a Titan with a V6?

    Titan Aero: What do you get if you cross a Titan with a V6?
    https://www.youtube.com/watch?v=xfpvm9z28Qk&w=560&h=315 Since smashing into the world of extruders with Titan back in March 2016 the next logical step for E3D was to integrate a Hot End into it, compress it as much as possible and make an ultra-compact all-in-one extruder and hotend. As with the original Titan, we came up with some design objectives before cracking on with prototyping...
    Read more »
  3. The E3D v6 HotEnd Design and Details

    The E3D v6 HotEnd Design and Details
    It's been a long road to v6; we've gone back to the drawing board and taken a good hard look at every tiny detail in the system. We've had to push back release a few times to ensure that things were absolutely correct in manufacture and design, but we're finally ready to release the full details of our new HotEnd. ...
    Read more »

3 Item(s)

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715