This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. Find out more.
E3D Premium - Flex-PolyEster (Shore 45D) - Black - 2.85mm - 500g
£28.00
£33.60
Share via:
Bendy, flexible filament for shock absorption and bounce.
Flexible Polyester is a versatile rubber like material that prints really nicely.
This is a rubbery flexible filament with excellent printability characteristics. This filament has flexibilty comparable to a tyre, and a shiny deep black colour. Best of all is the fact that this filament prints easily and cleanly. It exhibits much less stringing and ooze than other flexible filaments, and can be used to create sharp detailed, yet flexible prints.
Like all flexible filaments this does require some care in printing, the use of an extruder that supports the filament all the way from drive gear to hotend is helpful. If in doubt, print slowly.
Manufactured inside the EU at a facility with which we work closely. Guaranteed to be ±0.05mm in tolerance, but is usually ±0.02mm or better.
| Property | Value |
|---|---|
| Diameter | 2.85mm ± 0.05 |
| Minimum Weight | 500g |
| Processing Temp. | 200-220ºC |
| Bed Temp | 100ºC |
Write Your Own Review
Like all flexible filaments this does require some care in printing, the use of an extruder that supports the filament all the way from drive gear to hotend is helpful. If in doubt, print slowly. The shorter the filament path, the more precise the extrusion, so we recommend using a Titan Aero for printing flexibles. Print Temperature: 200°C - 220°C Bed Temperature: 100°C
Flex-PolyEster info
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715