Important - Due to updates with our stock management system, any orders placed may not be shipped until Wednesday the 21st November
E3D Premium - Flex-PolyEster (Shore 65D) - Black - 2.85mm - 500g
£28.00 £33.60
Flexible Polyester 65D Bridges the gap between very soft materials like NinjaFlex and very hard materials like PLA and ABS.

Flexible Polyester 65D Bridges the gap between very soft materials like NinjaFlex and very hard materials like PLA and ABS.

This is a rubbery flexible filament with excellent printability characteristics. This filament has flexibilty comparable to a hard rubber, such as a skateboard wheel, and a shiny deep black colour. Best of all is the fact that this filament prints easily and cleanly. It exhibits much less stringing and ooze than other flexible filaments, and can be used to create sharp detailed, yet flexible prints.

This is a "less-flexible" material, and as such is a great deal easier to print than the very soft conventional materials. With appropriate care and slow printing it can even be printed through short bowden tubes.

Manufactured inside the EU at a facility with which we work closely. Guaranteed to be ±0.05mm in tolerance, but is usually ±0.02mm or better.

 
Property Value
Diameter 2.85mm ± 0.05
Minimum Weight 500g
Processing Temp. 200-220ºC
Bed Temp 100ºC
Write Your Own Review
Write a review
Rating

See our full documentation here: https://e3d-online.dozuki.com

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715