Polymaker Polymide CoPA Filament - Nylon Natural - 1.75mm - 750g
£52.90 £63.48
21 available immediately

PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C. We recommend that the material be used with PolyBox to keep it at dry conditions (relative humidity of 20% or less) at all times to make sure a best printing.

Features:

Warp Free: PolyMide™ CoPA is engineered to give excellent dimensional stability during printing, with near-zero warping.

Easy Printing: Unlike other Nylon filaments, PolyMide™ CoPA is extremely easy to work with. It is compatible with most filament-based 3D printers with no heated chamber/bed required!

Strong & Tough: The outstanding mechanical strength and toughness makes PolyMide™ CoPA the best choice of engineering material for your creative ideas!

Heat Resistant: With a high softening temperature of ~180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials in the market

Net Weight

750 g

Diameter

1.75 mm / 2.85 mm

Tolerance

± 0.05 mm (Typical ~ ± 0.02 mm )

Recommended Printing Temp

250 – 265 °C

Recommended Printing Speed

40 – 60 mm/s

Recommended HBP1 (if equipped) Temp

Up to 70 °C

Write Your Own Review
Write a review
Rating

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715