Due to high demand, orders will incur a delay of around 1 week
View as Grid List

30 Items

Page
per page
Set Descending Direction
  1. Quickview
    Ceramic Screwdriver for Adjusting Stepper Drivers
    These are a good quality Japanese branded driver that shou...
    £2.50 £3.00
  2. Quickview
    V6 PT100 Upgrade Kit
    PT100's are high temperature, high accuracy temperature se...
    £25.50 £30.60
  3. Quickview
    Thermistor Replacement Kit
    A kit containing the parts you need to replace a broken ol...
    £4.00 £4.80
  4. Quickview
    PT100 Amplifier Board
    An amplifier to allow your printer to read high performanc...
    £15.00 £18.00
  5. Quickview
    Type K Thermocouple (Welded Tip)
    These thermoucouples can be used in place of your thermist...
    £10.00 £12.00
  6. Quickview
    A4988 Stepper Driver with Heatsink
    A stepper driver for your printer, complete with heatsink....
    £6.50 £7.80
  7. Quickview
    12v Power Supply (33A, 400W)
    Power supply for RepRap 3D printers, in 12V and 24V versio...
    £32.00 £38.40
  8. Quickview
    LCD Controller With SD + Encoder with Adaptor for RAMPS
    A controller and interface for your printer.
    £27.00 £32.40
  9. Quickview
    Fibreglass Sleeving for Insulating Thermistors (100mm)
    Fibreglass sleeving is used in HotEnds for easy, neat, and...
    £0.25 £0.30
  10. Quickview
    50x50x15mm 12v DC Side Blow Fan
    A side-blowing 12V DC fan for HotEnd and part cooling. Thi...
    £4.50 £5.40
  11. Quickview
    Endstop Microswitch - Tab - Omron
    These micro-switches can be used as the end-stops for the ...
    £1.50 £1.80
  12. Quickview
    DRV8825 High Current 32x Microstepping Driver with H...
    A high-performance micro-stepping driver for your printer....
    £8.50 £10.20
  13. Quickview
    24v Power Supply (16.5A, 400W)
    Power supply for RepRap 3D printers, in 12V and 24V versio...
    £32.00 £38.40
  14. Quickview
    PT100 Temperature Sensor
    Make your HotEnd run at higher temperatures with better ac...
    £12.50 £15.00
  15. Quickview
    Thermistor Cartridge
    A custom made thermistor encapsulated into an easy to use ...
    £4.50 £5.40
  16. Quickview
    Type K Thermocouple Cartridge
    These new Type-K Thermocouples come in a neat little 3mm x...
    £10.00 £12.00
  17. Quickview
    PCB Heated Bed MK2Y 12v - Round
    A 12V heated bed for your Delta printer.
    £12.50 £15.00
  18. Quickview
    Experimental Ceramic Heater Cartridge - 240v - 100w
    High-wattage ceramic Heater Cartridge for DIY heater beds....
    £15.00 £18.00
  19. Quickview
    Endstop Microswitch - Plunger - Omron
    These micro-switches can be used as the end-stops for the ...
    £1.50 £1.80
  20. Quickview
    External Thermocouple Board v1.0
    This is the external thermocouple board by RepRapWorld.com...
    £12.00 £14.40
  21. Quickview
    Motor Cable 4-Way with connector 1200mm
    A nice long (1200mm) motor cable for linking up 4 wired st...
    £1.50 £1.80
  22. Quickview
    Endstop Cable 3-Way with connector 1000mm
    A nice long (1000mm) End-Stop cable for wiring up endstops...
    £1.25 £1.50
  23. Quickview
    Ferrules for joining wires (Pack of 10)
    Handy little crimp ferrules for making easy quick high tem...
    £1.00 £1.20
  24. Quickview
    Fan/Thermistor Molex Connector Cable
    A nice long (1000mm) connector cable, red and black colour...
    £0.80 £0.96
  25. Quickview
    PCB Heated Bed MK2B 12v and 24v
    A heated bed for your printer that works off 12 or 24 volt...
    £12.50 £15.00
  26. Quickview
    Flexible motor coupling 5mm to 5mm
    For coupling motors to leadscrews, and other things!
    £2.50 £3.00
  27. Quickview
    Flexible motor coupling 5mm to 8mm
    For coupling motors to leadscrews, and other things!
    £2.50 £3.00
  28. Quickview
    V6 Fan Duct
    A fan duct for the V6 HotEnd, injection moulded out of tra...
    £1.00 £1.20
  29. Quickview
    Lite6 Fan Duct
    Fan duct designed to fit the Lite6 HotEnd. Harder-wearing ...
    £1.00 £1.20
  30. Quickview
    Thermal Compound Paste
    1g Packet of thermal compound paste
    £1.00 £1.20
View as Grid List

30 Items

Page
per page
Set Descending Direction

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715