Proto-Pasta-Magnetic-Iron-PLA - 1.75mm - 125g
£20.00 £24.00
Experience Proto-Pasta's most "attractive" material yet!

Experience Proto-Pasta's most attractive material yet!

Proto-pasta Magnetic Iron PLA—as its name implies—responds to magnets and behaves similarly to pure iron, even to the point of rusting! Magnetism opens up a new world of practical applications and fun creations.

This filament is more abrasive than standard PLA. Prolonged use may result in accelerated nozzle wear. E3D's hardened-steel nozzle range are harder wearing than the classic brass nozzle, and may be more suitable for this material.

  • Available in 1.75 mm & 2.85mm.  
  • 125g, un-spooled loose coil.
  • All material is sealed with desiccant in a plastic bag.
  • Usable on all PLA-compatible printers, such as E3D's BigBox, Makerbot, Ultimaker, Printrbot, Lulzbot, and more!

Processing is comparable to standard PLA. No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines.

In our experience, good results were achieved when printing at 185C using a .5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head.

Write Your Own Review
Write a review
Rating

This filament is more abrasive than standard PLA. Prolonged use may result in accelerated nozzle wear. E3D's stainless steel and hardened steel nozzle ranges are harder wearing than the classic brass nozzle. For extensive use, a hardened steel extruder hobb is also recommended. Processing is comparable to standard PLA. No heated bed required. Due to increased brittleness, process may be less consistent on smaller nozzles and/or bowden type machines. In our experience, good results were achieved when printing at 185C using a .5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head.

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715