Image

Legends Dual-Extrusion Pack

Parts

  • 1 x Cyclops Heat Sink
  • 2 x Cyclops heat Breaks
  • 1 x Cyclops Heater Block
  • 1 x Cyclops 0.40mm Nozzle
  • 2 x Kraken Heat Breaks
  • 2 x V6 Heater Blocks
  • 2 x V6 0.40mm Nozzle (1.75mm Filament)
  • 2 x Bowden Threaded Coupling
  • 2 x Collets
 
  • 1.6m PTFE Tubing (4mm OD for 1.75mm Filament) NOT PICTURED
  • 3 x 12v Heater Cartridges
  • 1 x 100k Semitec Thermistor
  • 2 x Thermistor Cartridges
  • 100mm x Blue Fiberglass Sleeving
  • 1 x 2-Way Thermistor Cable
  • 3 x Extension Wires (Thermistors and Fan)
  • 6 x Zip Ties
  • 1 x 12v 30mm Fan
  • 1 x Cyclops Spanner
  • 2 x Silicone Socks

Cyclops Fixings Kit

    Cyclops Cold Side Kit
  • 2 x Pastfast30 3.0 X 16 Screws
  • 3 x M3x10 Socket Dome Screw
  • 3 x M3 Washers
  • 4 x M3 Grub Screws
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench
    Cyclops Hot Side Kit
  • 4 x Ferrules
  • 1 x M3 Grub Screw
  • 2 x M4 Grub Screws
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer
  • 2 x Bearing Balls

Universal Fixings kit

  • 2 x M3x10 Socket Dome Screw (for securing heater cartridge)
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer (for securing heater cartridge)
  • 4 x Pastfast30 3.0 X 16 Screws (for securing fan)
  • 2 x M3 Grub Screws (for securing thermistor)
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench
Image

Cyclops Full Kit

    Standard Kit
  • 1 x Cyclops Aluminium Heat Sink
  • 2 x Cyclops Heat Breaks
  • 1 x Cyclops Heater Block
  • 1 x Cyclops 0.40mm Nozzle
  • 2 x Bowden Couplings - Threaded
  • 1.6m PTFE Tubing (4mm OD for 1.75mm Filament) NOT PICTURED
  • 1 x 100k Semitec Thermistor
  • 100mm x Blue Fiberglass Sleeving
  • 1 x 2-Way Thermistor Cable
  • 1 x 12v 30W Heater Cartridge
  • 1 x 12v 30mm Fan
  • 1 x Cyclops Fixings Kit
  • 1 x Cyclops Spanner
  • 2 x Collets
  • 1 x Thermal Paste Packet
  • 1 x Extension Wire (for fan)
  • 2 x Zip Ties
    Cyclops Cold Side Kit
  • 2 x Pastfast30 3.0 X 16 Screws
  • 3 x M3x10 Socket Dome Screw
  • 3 x M3 Washers
  • 4 x M3 Grub Screws
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench
    Cyclops Hot Side Kit
  • 4 x Ferrules
  • 1 x M3 Grub Screw
  • 2 x M4 Grub Screws
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer
  • 2 x Bearing Balls
Image

Chimera Full Kit

    Standard Kit
  • 1 x Cyclops Heater Block
  • 2 x Kraken Heat Breaks
  • 2 x V6 Heater Blocks
  • 2 x V6 0.4mm Brass Nozzle (1.75mm Filament)
  • 2 x Bowden Couplings - Threaded
  • 2 x Collets
  • 1.6m PTFE Tubing (4mm OD for 1.75mm Filament) NOT PICTURED
  • 2 x Thermistor Cartridges
  • 3 x Extension Wires (For thermistors and fan)
  • 2 x 12V 30W Heater Cartridge
  • 1 x 12V 30mm Fan
  • 2 x Silicone Socks
  • 4 x Zipties
    Cyclops Cold Side Kit
  • 2 x Pastfast30 3.0 X 16 Screws
  • 3 x M3x10 Socket Dome Screw
  • 3 x M3 Washers
  • 4 x M3 Grub Screws
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench
    Universal Fixings Kit
  • 2 x M3x10 Socket Dome Screw (for securing heater cartridge)
  • 1 x M3x3 Socket Dome Screw
  • 1 x M3 Washer (for securing heater cartridge)
  • 4 x Pastfast30 3.0 X 16 Screws (for securing fan)
  • 2 x M3 Grub Screws (for securing thermistor)
  • 1 x 1.5 mm Hex Wrench
  • 1 x 2 mm Hex Wrench

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715