A complete kit containing everything you need to upgrade your 3D printer for water-based cooling. Compatible with most standard water-cooling systems and designed for use with E3D water-cooled HotEnds. 12V only: for 24V printers please use a DC-DC converter.
Removing the fan from the print-head means that we can use a bigger fan, for better, quieter performance. Efficient two-in-one radiator and fan design.
Water-cooling allows for exceptional thermal performance even in warm and heated environments.
Combined Reservoir and Pump
A compact, clean design combines the reservoir and pump into one easily-mounted component.
Based on standard water-cooling parts, our kit is compatible with computer cooling systems and can be added to where necessary.
Warnings: Not suitable for use with plain tap water! This kit can also be used with 24V printers, but you will require a DC-DC converter.
Water-Cooling: The next step in 3D printing
We've reached the limits of what air-cooled 3D printing can do. This kit contains everything you need to upgrade your printer for water-cooling.
We've reached the limits of what's possible with HotEnd fans mounted on the print-head. This combination fan and radiator is much larger and more efficient than what's achievable with air-cooling systems. This also makes it quieter, and very low-vibration.
By limiting the number of parts, we've made this kit easier to use than any water-cooling system we've seen for 3D printing before. The parts fit together snugly, and have been designed for neat and ergonomic building.
Our kit design is based on standard computer cooling components, allowing users to adapt and expand on the kit as they wish, to cool additional HotEnds or even motors and extruders inside the print envelope. With 8mm outer diameter/4mm inner diameter silicone tubing, it's also compatible with most water cooling systems.
This kit can be used with any water-based coolant from Purified H2O to popular UV-toned brands.
- 12V Reservoir-Pump
- 12V Radiator-Fan
- 2x Cables with Molex connectors
- Silicone tubing (OD: 8mm; ID: 5mm)
- Nylon tubing (OD: 4mm)
- Fixings Kit
- Tubing adaptors
- 2x Collets + Collet Clips
Configure Water Cooling Kit
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15