Skip to product information
1 of 4

spoolWorks Scaffold Soluble Support Filament

spoolWorks Scaffold Soluble Support Filament

SKU:F-SW-SCAFFOLD-300-2300

Filament Diameter
Weight

Low stock

Regular price £203.50 GBP
Regular price Sale price £203.50 GBP
Sale Sold out
Taxes & Shipping calculated at checkout.

Scaffold is a water-soluble and break-away support filament that actually works.

Scaffold offers total design freedom, helping you to create complex geometries and complete functioning mechanisms in a single print (with no worries about overhangs!). Part of E3D’s spoolWorks range, Scaffold works best with our Edge and PLA filaments.

For a complete overview of Scaffold and what makes it so special, please see our blog.

Features

• Can be broken away or dissolved from prints in normal tap water
• PVA/PVOH-based but easy to print with low viscosity
• Exhaustively tested for exceptional quality
• Lower heat degradation and easily purged from nozzles
• Designed for perfect compatibility with spoolWorks Edge
• Shipped in a re-sealable bag with desiccant for exceptional dryness

Advised print settings

• PRINT TEMP: 215°C
• BED TEMP: From 20°C to 55C ideally, but will cope with bed temperatures as high as 110°C
• PRINT SPEED: ~50mm/s

Cautionary notes and advice

• You will need to create specific slicer settings to make the best of Scaffold.
• Scaffold needs to be kept dry, use the supplied resealable bag, or even better use this specially designed in-bag spool holder.
• Scaffold will degrade if kept for extended periods in a hot nozzle. Do not allow Scaffold to rest in the nozzle at temperature or you risk clogging and damaging the nozzle.
• Please read the documentation in order to use Scaffold at it's full potential

Note: All 3D printers are unique so adjust settings to taste!

View full details

⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.