This is a replacement Heat Sink for E3D V6 Bowden and Direct Hot Ends.
The 1.75mm Universal v6 HeatSink has been designed to utilise our unique embeded bowden couplings which makes the bowden so compact that we merged bowden and direct into the same product. The product is significantly less bulky than its v5 predecessor.
This product comes complete with the embedded bowden coupler installed in the heatsink.
Changes since v5
- The v6 1.75mm HeatSink is not cross compatible with v5 since the HeatBreak has changed from M6 to M7 in order to allow for a PTFE lining all the way down into the cold-side of the HeatBreak.
The v6 1.75mm HeatSink is not cross compatible with v5 since the HeatBreak has changed from M6 to M7 in order to allow for a PTFE lining all the way down into the cold-side of the Heat Break.
- PTFE Bowden Tubing (100mm) (1.75mm Filament)Price per 100mm. The tubing used is a specially selected P...£0.33 £0.40V6 Fan DuctA fan duct for the V6 HotEnd, injection moulded out of tra...£1.00 £1.20V6 Groove Mounting PlateOur groove mounting plates are designed to complement the ...£8.50 £10.20Cyclops/Cyclops+ Heat BreakThis is a replacement heat break for the E3D Cyclops Hot E...£12.00 £14.40Embedded Bowden Collet for Metal (1.75mm)These pneumatic fittings are designed to provide a simple ...£0.50 £0.60v6 HeatSink - 3mm DirectThis is a replacement Heat Sink for E3D V6 Bowden and Dire...£10.00 £12.00v6 HeatSink - 3mm BowdenA replacement v6 HeatSink for 3mm Bowden systems.£12.00 £14.40
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715