View as Grid List

29 Items

Page
per page
Set Descending Direction
  1. Quickview
    30x30x10mm DC Fan
    A standard DC fan for your general cooling needs. This fan...
    £4.50 £5.4
  2. Quickview
    100k Ohm NTC Axial Thermistor - Honeywell
    Honeywell 100kOhm NTC Thermistor in an axial package.
    £3.50 £4.2
  3. Quickview
    100k Ohm NTC Thermistor - Semitec
    Semitec 100kOhm NTC Thermistor for all your temperature-se...
    £3.50 £4.2
  4. Quickview
    Ribbon Cable - 20 Way, 28AWG (per 100mm)
    This ribbon cable has numerous applications in the RepRap ...
    £0.45 £0.54
  5. Quickview
    Leadscrew Motor with POM nut
    This leadscrew motor has a integrated leadscrew of 365mm. ...
    £33.00 £39.6
  6. Quickview
    Geared Stepper Motor
    This motor uses a planetary gearbox with a 5.18:1 reductio...
    £30.00 £36
  7. Quickview
    Compact But Powerful Motor
    This motor is lighter and shorter than a typical NEMA17 mo...
    £11.00 £13.2
  8. Quickview
    High Torque Axes Motor
    A good all-round work horse, primarily used for driving pr...
    £13.00 £15.6
  9. Quickview
    Super Whopper Motor
    This motor is for when you need extra power and motor mass...
    £15.50 £18.6
  10. Quickview
    Anti-backlash nut
    Helps to reduce, if not eliminate, backlash. This anti-bac...
    £10.00 £12
  11. Quickview
    TMC2100 Stepper Motor Driver & Heatsink.
    Original Watterott TMC2100 SilentStepStick.
    £14.99 £17.99
  12. Quickview
    TMC2208 Stepper Motor Driver & Heatsink.
    Original Watterott TMC2208 SilentStepStick.
    £12.99 £15.59
  13. Quickview
    40x40x20 Blower Fan 24V
    A 24V centrifugal fan for active cooling solutions on 3D p...
    £5.99 £7.19
  14. Quickview
    60x60x10 Fan 24v.
    60x60x10mm 24V fan. A spare fan for RepRap 3D printers inc...
    £5.99 £7.19
  15. Quickview
    Heater Cartridge 30w
    A powerful, compact beast of a heater, used as standard wi...

    Starting at £4.50 £5.4

  16. Quickview
    Heater Cartidge 40w
    A powerful, compact beast of a heater.

    Starting at £4.50 £5.4

  17. Quickview
    Ceramic Screwdriver for Adjusting Stepper Drivers
    These are a good quality Japanese branded driver that shou...
    £2.50 £3
  18. Quickview
    V6 PT100 Total Upgrade Kit
    PT100's are high temperature, high accuracy temperature se...
    £31.00 £37.2
  19. Quickview
    Thermistor Replacement Kit
    A kit containing the parts you need to replace a broken ol...
    £4.00 £4.8
  20. Quickview
    PT100 Amplifier Board
    An amplifier to allow your printer to read high performanc...
    £15.00 £18
  21. Quickview
    Prusa i3 V6 Upgrade Kit
    This kit allows you to upgrade Prusa i3 type machines to f...
    £97.50 £117
  22. Quickview
    30x30x10mm DC Fan with attached cable
    A 30x30x10mm DC fan with a 1m cable pre-attached. Can be u...
    £4.50 £5.4
  23. Quickview
    Slimline Stepper Motor
    Slimline Nema17 motor available as an add-on for Titan and...
    £9.50 £11.4
  24. Quickview
    Type K Thermocouple (Welded Tip)
    These thermoucouples can be used in place of your thermist...
    £10.00 £12
  25. Quickview
    A4988 Stepper Driver with Heatsink
    A stepper driver for your printer, complete with heatsink....
    £6.50 £7.8
  26. Quickview
    12v Power Supply (33A, 400W)
    Power supply for RepRap 3D printers, in 12V and 24V versio...
    £32.00 £38.4
  27. Quickview
    RAMPS 1.4 - Arduino Mega Pololu Shield
    A controller and interface for your printer.
    £25.00 £30
  28. Quickview
    Arduino Mega 2560 Compatible Controller Board & USB ...
    Based on the well known Arduino Mega 2560 board. USB cable...
    £25.00 £30
  29. Quickview
    LCD Controller With SD + Encoder with Adaptor for RAMPS
    A controller and interface for your printer.
    £27.00 £32.4
View as Grid List

29 Items

Page
per page
Set Descending Direction

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15