We don't have any specific recommendations for this product at the moment.
30x30x10mm DC Fan with attached cable
A 30x30x10mm DC fan with a 1m cable pre-attached. Can be used with E3D HotEnds including the V6 and Lite6. 4.1cfm
Configure 30x30x10mm DC Fan with attached cable
- 12v Power Supply (33A, 400W)Power supply for RepRap 3D printers, in 12V and 24V versio...£32.00 £38.40V6 Fan DuctA fan duct for the V6 HotEnd, injection moulded out of tra...£1.00 £1.20v6 HotEnd Metal Parts Only - 1.75mm UniversalThe E3D V6 Hot End is easier, smaller, and higher performa...£32.00 £38.40v6 HotEnd Metal Parts Only - 3.00mm BowdenThe E3D V6 Hot End is easier, smaller, and higher performa...£33.00 £39.60v6 HotEnd Metal Parts Only - 3.00mm DirectThe E3D V6 Hot End is easier, smaller, and higher performa...£31.00 £37.2040x40x10mm DC FanA standard, high-speed DC fan for use with the Titan Aero ...£4.50 £5.4060x60x20mm 12v DC FanA standard 12V DC fan for your general cooling needs. This...£5.00 £6.0050x50x15mm 12v DC Side Blow FanA side-blowing 12V DC fan for HotEnd and part cooling. Thi...£4.50 £5.40
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15