Due to high demand your order will incur a delay whilst we work through our backlog
Chimera+
£54.91 £65.89

Sleeker, more moddable, and easier to use than ever: we've upgraded the Chimera for usability and stunning results. Get the Chimera+ for two-filament, two-nozzle dual extrusion. Available as a water- or air-cooled HotEnd, in 12V and 24V. 

Suitable for 1.75mm bowden setups only.

Dual Extrusion+

Same great printing performance and possibilities; new compatibility and features.

It’s always been possible to get great results using Cyclops and Chimera, but Cyclops in particular was something of an outlier in our ecosystem. Customers often found it hard to use, and we felt that our dual-extrusion system was due for an upgrade.

Features:

Compatibility

  • Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges. They also work with Capricorn bowden tubing and our water-cooling kit.
  • Cyclops+ and Chimera+ are both now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.
  • Cyclops+ retains compatibility with all previous Cyclops nozzles and heat breaks.

Cyclops Rework

  • The Cyclops heater block has had a complete redesign, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
  • The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.

Water Cooling

  • An exceptionally light-weight, effective water-cooled heatsink that is compatible with our water-cooling kit and nylon tubing.

Things to watch out for:

  • We recommend only using similar plastics when “mixing” using the Cyclops+ HotEnd.

  • 1.75mm bowden setups only

Cyclops+ is no longer compatible with

  • Old-style Cyclops heater blocks

  • Old-style Cyclops and Chimera heatsinks due to the increased distance between the filament inputs

  • Bead-type temperature sensors

Write Your Own Review
Write a review
Rating

cyclops and chimera cold side

Air-Cooled Cold Side

  • Air-cooled heatsink
  • 2x black plastic collets
  • 2x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
  • 12V/24V fan
cyclops and chimera aqua cold side

Water-Cooled Cold Side

  • Water-cooled heatsink
  • 4x black plastic collets
  • 4x blue plastic collet clips
  • Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
  • 800mm PTFE bowden tubing
chimera hot side

Chimera Hot Side

  • Heatsink compound
  • 2x silicone socks
  • 2x 0.4mm V6 brass nozzles
  • 2x V6 heater blocks
  • Fixings kit
  • 2x30W Heater cartridges (12V/24V)
  • 2x Thermistor cartridges
cyclops hot side

Cyclops Hot Side

  • 0.4mm Cyclops nozzle
  • Cyclops heater block
  • 2x Kraken heatbreaks
  • Cyclops+ hotside fixings kit
  • Heatsink Compound
  • 30W Heater cartridge (12V/24V)
  • Thermistor cartridge

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715