Our flagship jack-of-all trades all-metal HotEnd. V6 is suitable for practically any printer, and has the widest array of upgrade options. For everyday printing or exotic circumstances, V6 will deliver the reliability and performance that are E3D's specialities
A cheaper and simpler PTFE-lined HotEnd. While not suitable for exotic materials requiring exceptionally high temperatures, the Lite6 is more than a match for typical PLA and ABS printing. It's perfect for everyday printing and can always be upgraded for more adventurous printing.
Look no further for a complete extrusion system that just works; the Titan Aero is the ultimate all-in-one package of HotEnd and Extruder. It's easy to mount and more compact than the traditional V6 + Titan pairing—perfect for flexible materials.
Big and fast
The Volcano is an upgrade that more than doubles your filament flow rate. It's specifically designed be compatible with our largest nozzles. A must for large format printers, the Volcano the best HotEnd for printing big and fast. It prints thicker, stronger layers without sacrificing the V6's reliability or ease of use.
Dual Extrusion for Everyone
Chimera is a compact dual HotEnd assembly, opening up the possibilities of printing with two colors or two different materials at different temperatures. In particular, Chimera lets you use a dedicated support material for complex prints. You'll have access to paired filaments such as Scaffold and Edge, or MatX and Scaffold Snap.
Advanced Multi-Color Printing
A more advanced dual extrusion HotEnd that pushes both filaments through a single nozzle. Though not suitable for printing with materials that have different melting points, Cyclops allows you to print without the tricky calibration and ooze control of a traditional dual HotEnd setup. The Cyclops slightly more advanced to use compared to a Chimera, and so requires a bit more experience for smooth printing.
A beast suitable for the most advanced users, Kraken sports four separate HotEnds and liquid-cooling. It can print anything, in any color, with any range of materials. While not for the faint of heart, Kraken provides ultimate flexibility for the most complex prints.
Get to know your HotEnd!
Your Heatsink regulates the heat in your HotEnd, keeping your HotEnd clog-free. You’ll need a different heatsink depending on the diameter of your filament, and whether you want a bowden or direct drive setup for your 3D printer.
Your cooling fan blows air over your heatsink, carrying away heat that would otherwise cause filament to buckle or clog.
It is essential for your HotEnd to melt filament only in the nozzle, and to rapidly dissipate heat elsewhere. This way, the rest of your filament can be pushed or pulled (to extrude, or retract) while solid, not molten. Your heat break creates and controls the transition zone from solid to molten filament.
04. Heater Block
Your heater block holds all the parts of your HotEnd in place and—as the name implies—transfers the heat from your heater cartridge to your nozzle and filament. Copper-plated heater blocks can be used for extreme temperatures, as well.
Your nozzle is the tip of your HotEnd, through which filament is actually pushed out onto your print. Your nozzle also flattens down the filament you extrude, leaving smooth, regular layers behind. Depending on the diameter of your nozzle, it will be able to extrude more filament faster, or less filament but be more precise. Our ecosystem has a huge variety of nozzles for all printing applications.
06. Heater Cartridge
Your heater cartridge produces the heat that melts your filament. Depending on the voltage of your 3D printer, you’ll need to select the appropriate heater cartridge.
All 3D printers have a temperature sensor of some kind to provide temperature feedback and control. For typical filaments a simple thermistor cartridge will more than suffice, but if you need to print hotter you can swap in a PT100 sensor.V1
Customise your Titan Aero hot-end and extruder combo. All the lightweight performance, reliability and usability of V6 and Titan. V6-ecosystem integration.
The performance of the E3D V6, with a 25mm increase in Z-height.
Custom machined hobb teeth for serious grip on your filament.
Unique British engineering for a heat sink design like no other.
Aero is a full member of the E3D ecosystem, meaning you can swap out blocks, nozzles, and more!
Read all about it (plus admire some very sexy engineering gifs) on our blog!
Power + Performance for your 3D Printer
Titan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own.
01. Compact + Rigid
By combining a hot end and extruder, Titan Aero is ultra compact. It offers you an extra 25mm of Z-axis build height compared to a V6 + Titan combo.
Compact also means rigid. Aero copes brilliantly with knocks and bumps, allowing it to work with the fastest of 3D printers.
02. Accurate Extrusion; Great for Flexibles.
By having a short, well constrained filament path, Aero is great for flexibles. It minimises places where filament can bend, buckle and jam, giving a better flexible printing experience.
03. Ecosystem Compatible, All Metal HotEnd.
Titan Aero is built on the E3D V6 all metal design, allowing you to reliably 3D print any thermoplastic at temperatures of more than 300°C.
It’s also been designed to take standard V6 heatbreaks, so that you can interchange components from E3D’s entire modular ecosystem to suit your needs. Choose from temperature sensors, heater cartridges, Volcano, or one of the 92+ different nozzles we provide.
04. Easy to Install, Easy to Use.
Aero is mounted using a standard hole pattern, allowing it to be fitted onto a wide range of 3D printers and making designing mounting solutions straightforward to do.
By using Titan’s custom engineering and rigorously tested extrusion mechanism, Aero is highly reliable and retains all of the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.
Likewise the use of Titan’s 3:1 gearing ratio allows the use of smaller motors, making for a lighter weight carriage whilst maintaining reliability and pushing power.