We don't have any specific recommendations for this product at the moment.
This heater block works with our New Standard thermistor sensor for V6... Along with our other temperature sensor cartridges, this now allows you easily swap to use our high temperature, high accuracy PT100 temperature sensors on your E3D-v6 HotEnd, or a Type-K Thermistor cartridge, instead of a thermistor.
These heater blocks are extremely similar to the standard E3D-v6 heater block, but instead of a hole sized for a thermistor with a clamping washer these blocks have a hole sized for the PT100 sensor, and use an M3 grub screw to quickly and easily secure or release the sensor.
Supplied with an M3 Grub screw to secure the PT100, and an M3 Socket Screw to clamp the heater cartridge.
Did you know we now make Volcano sensor cartridge blocks as well?! Check it out here.
This Heater block is compatible with the E3D ecosystem of Hot Ends and nozzles. It does NOT fit a Cyclops Hot End or Volcano nozzles. V5 and V6 Heater Blocks are cross compatible as both use an M6 thread. Note that V6 heater blocks are 0.5mm shorter than V5.
- 100k Ohm NTC Axial Thermistor - HoneywellHoneywell 100kOhm NTC Thermistor in an axial package.£3.50 £4.20100k Ohm NTC Thermistor - SemitecSemitec 100kOhm NTC Thermistor for all your temperature-se...£3.50 £4.20Type K Thermocouple (Welded Tip)These thermoucouples can be used in place of your thermist...£10.00 £12.00v6 HotEnd Metal Parts Only - 3.00mm DirectThe E3D V6 Hot End is easier, smaller, and higher performa...£31.00 £37.20Fibreglass Sleeving for Insulating Thermistors (100mm)Fibreglass sleeving is used in HotEnds for easy, neat, and...£0.25 £0.30Ferrules for joining wires (Pack of 10)Handy little crimp ferrules for making easy quick high tem...£1.00 £1.20Fan/Thermistor Molex Connector CableA nice long (1000mm) connector cable, red and black colour...£0.80 £0.96Cyclops Heater Block (old style)A replacement heater block for the E3D Cyclops Hot End.&nb...£40.00 £48.00v6 Heater Block & Fixings (Thermistor Clamping)This is a replacement Heater Block designed for E3D V6 and...£9.00 £10.80Thermistor Replacement KitA kit containing the parts you need to replace a broken ol...£4.00 £4.80Thermal Compound Paste1g Packet of thermal compound paste£1.00 £1.20V6 Stainless Steel Heater Block for Sensor CartridgesStainless steel heater blocks to pair with stainless steel...£20.00 £24.00
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB 171 0597 15