
During the Brexit transition, we have noticed a small number of issues with customs charges, if you think you are affected please get in touch with us before paying it. Continue to buy with confidence and be assured that we have implemented a plan which aims to ensure the least disruptive and cost-effective solution for our customers, your patience during this time is much appreciated.
Faster
Thanks to its larger melt zone, the Volcano upgrade enables users to print thicker and wider tracks which results in dramatically reduced print times.
Stronger
In addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.
Bigger
With the print volumes increasing and interest of larger 3D printed items such as furniture and automotive parts, comes a requirement to decrease the overall print time. The Volcano heater block was designed to make printing large parts more efficient by allowing the use of larger nozzle sizes and higher volumetric flow rates.
Volcano Starter Pack
- 1 x V6 Universal Fixing Kit
- 1 x Thermistor Cartridge
- 1 x 30W Heater Cartridge
- 1 x Extension Wire (for thermistor)
- 1 x Ziptie
- 1 x Volcano Heater Block
- 1 x 0.80 mm Brass Volcano Nozzle
Fixings included with the Starter Pack
- 2 x M3x10 Socket Dome Screw (for securing heater cartridge)
- 1 x M3x3 Socket Dome Screw
- 1 x M3 Washer (for securing heater cartridge)
- 4 x Plastfast30 3.0 X 16 Screws (for securing fan)
- 2 x M3 Grub Screws (for securing thermistor)
- 1 x 1.5 mm Hex Wrench
- 1 x 2 mm Hex Wrench
Eruption Pack
- 1 x V6 Universal Fixing Kit
- 1 x Thermistor Cartridge
- 1 x 30W Heater Cartridge
- 1 x Extension Wire (for thermistor)
- 1 x Ziptie
- 1 x Volcano Heater Block
- 1 x 0.60 mm Brass Volcano Nozzle
- 1 x 0.80 mm Brass Volcano Nozzle
- 1 x 1.00 mm Brass Volcano Nozzle
- 1 x 1.20 mm Brass Volcano Nozzle
Fixings included with the Eruption Pack
- 2 x M3x10 Socket Dome Screw (for securing heater cartridge)
- 1 x M3x3 Socket Dome Screw
- 1 x M3 Washer (for securing heater cartridge)
- 4 x Plastfast30 3.0 X 16 Screws (for securing fan)
- 2 x M3 Grub Screws (for securing thermistor)
- 1 x 1.5 mm Hex Wrench
- 1 x 2 mm Hex Wrench