Please find post Brexit import information here, make sure to check your charges and if they don't match up then please get in contact with us before paying them. Continue to buy with confidence and be assured that we have implemented a plan which aims to ensure the least disruptive and cost-effective solution for our customers, your patience during this time is much appreciated.
SuperVolcano boasts up to 11x the volumetric flow rate of the V6. Read more about just how quick it can print on our blog post.
The SuperVolcano can reach 285°C with the supplied thermistor, by swapping your thermistor for a PT100 or thermocouple you’ll be able to exceed 400°C. Print anything from PLA to PEEK.
Full range of nozzles
Try out a range of nozzle materials and sizes. From extensive testing, we found using a 1.0 mm nozzle gives the best balance of speed and detail. But you have the option to choose from 0.6mm up to 1.2mm.
Greater interlayer and bed adhesion
Print wider and higher tracks - this provides a greater surface area for these tracks to bond to each other and the bed, resulting in stronger prints with reduced warping.
Compatible with the E3D ecosystem
The SuperVolcano upgrade kit is fully compatible with the E3D HotEnd range. Attach with ease to your V6, Titan Aero, Titan Aqua, Chimera+ or Hemera.
Space for a second thermistor
If extra redundancy/monitoring of your HotEnd performance is what you are after, then feel free to add another thermistor into the equation (not that that’s required).
- 11x the volumetric flow rate of the V6
- Maximum temperature: 285°C
- Plated copper HeaterBlock
- 1 x Plated copper SuperVolcano HeaterBlock
- 1 x Thermistor cartridge
- 1 x Thermistor extension cable
- 1 x SuperVolcano sock
- 1 x 80W heater cartridge 12V or 24V
- 1 x 1mm Brass nozzle 1.75 mm or 2.85 mm
- 1 x Thermal paste
- 1 x Mosfet Board 12V only
- 1 x Mosfet wires 12V only