SuperVolcano Upgrade Kit
£80.00 £96.00

Upgrade your E3D HotEnd with the SuperVolcano for super fast printing, even at high temperatures. Choose either our Starter Kit (1x 1.00mm Brass Nozzle) or our Eruption Kit (1x 0.80mm, 1x 1.00mm, 1x 1.20mm and 1x 1.40mm Brass Nozzles).  Other nozzles are available for printing different materials. 

Faster 3D printing

The SuperVolcano boasts upto 11x the volumetric throughput of the market leading V6! Read more about just how quick it can print on our blog post

High Temperature Performance

The SuperVolcano can reach 285°C natively, and by swapping your thermistor for a thermocouple or PT100 you'll be able to exceed 400°C. Print anything from PLA to PEEK.

Full range of nozzles

Try out a full range of nozzle materials and sizes. We found using a 1.0mm nozzle gave the best combination of speed to detail.

Great interlayer and bed adhesion

Print wider and higher tracks - this provides a greater area for these tracks to bond to each other (stronger parts) and the bed (reducing effects of warping).

Compatible with the E3D ecosystem

This SuperVolcano upgrade kit is fully compatible with the E3D HotEnd range. Attach with ease to your V6, Titan Aero, Titan Aqua, Chimera+, or if you're feeling brave, the Kraken!

Space for a second thermistor

If extra redundancy/monitoring of your HotEnd performance is what you’re after, then feel free to add another thermistor into the equation (not that its required!).

Write Your Own Review
Write a review
Rating

Starter Pack

  • 1 x Plated Copper SuperVolcano Heater Block
  • 1 x Thermistor
  • 1 x Thermistor Extension Cable
  • 1 x Silicone Glass Fibre Sleeving
  • 1 x 80W Heater Cartridge
  • 1 x Brass 1mm Nozzle
  • 1 x Thermal Paste
  • 4 x M3 Grub Screws
  • 1 x Hex Key

If 12V:

  • 1 x Mosfet Board
  • 1 x Mosfet Wires

Eruption Pack

  • 1 x Plated Copper SuperVolcano Heater Block
  • 1 x Thermistor
  • 1 x Thermistor Extension Cable
  • 1 x Silicone Glass Fibre Sleeving
  • 1 x 80W Heater Cartridge
  • 1 x Brass 0.8mm, 1mm, 1.2mm and 1.4mm Nozzle
  • 1 x Thermal Paste
  • 4 x M3 Grub Screws
  • 1 x Hex Key

If 12V:

  • 1 x Mosfet Board
  • 1 x Mosfet Wires

See our full documentation here: http://e3d-online.dozuki.com

Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715