Bambu Lab A1 Support: High Flow ObXidian HotEnd
Table of Contents
Summary
- Compatible with: Bambu Lab A1 & A1 Mini.
- Mass ≈ 86g
- Filament diameter: 1.75mm
Cleaning Guidelines
Recommended cleaning methods
- Nylon cleaning filament (internal cleaning method)
- Warm pull (internal cleaning method)
- Cold pull (internal cleaning method)
- Brass brush (external cleaning method)
Non-recommended cleaning methods
- Needle (internal cleaning)
- Steel wire brushes (external cleaning methods)
- Blow torch (internal/external cleaning method)
Nozzle Identification
Diameter (mm) | Max temperature °C | Abrasion resistant? | Nozzle Colour |
---|---|---|---|
0.40 | 300 | Yes | Black |
0.60 | 300 | Yes | Black |
Volumetric Flow Rates
Nozzle | Size (mm) | PLA Basic | PETG-HF | Nozzle Colour |
---|---|---|---|---|
Bambu Lab Hardened Steel | 0.40 | 26 | 30 | Silver |
E3D High Flow ObXidian | 0.40 | 45 | 45 | Black |
Bambu Lab Hardened Steel | 0.60 | 27 | 33 | Silver |
E3D High Flow ObXidian | 0.60 | 56 | 57 | Black |
Slicer Profiles
Get the most out of your A1 HotEnd with these optimsied slicer profiles.