Our market-leading Hot End: all-metal design, British engineering, high-temperature performance. Customize your V6 to suit your 3D printer, and add upgrades to take your 3D printing to the next level. Add a nozzle fun pack to try printing at different resolutions, experience large-format 3D printing with a Power Up!, or experiment with advanced material printing with a Nozzle Pro Pack.
High Temperature Performance
All-metal design for reliable high-temperature printing.
Print All The Things
Easily print any filament on the market with less stringing and clogging.
Switch up your HotEnd with the full E3D ecosystem of blocks, nozzles, and more!
Support at Every Step
We can help with everything from mounting to troubleshooting with our Wiki and dedicated support team.
The E3D V6 Hot End: Smaller, Easier, High Performance
The E3D V6 is our market-leading signature Hot End. If you would like to know more about the design process, check out the blog post! Assembly guidelines for the v6 can be found here
Our signature all-metal design allows you to reliably print high temperature materials, and we've added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.
The V6 can comfortably reach 285°C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating. For more information about the maximum temperature recommendation please visit this documentation page
We've focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions!
Our new thermistor cartridge simply slides into place and is secured with a single screw. We use high temperature glass sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.
We've kept our sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
The V6 is a fully-integrated part of the E3D Ecosystem. Our range of nozzles and blocks gives you more opportunity to choose how you want to print. Choose from different filament diameters and materials to take your printing to the next level, and upgrade for ultra high-temperature printing!
We have an active user base on many printer forums, including RepRap Forums, Google+, SeeMeCNC, Solidoodle, Ultimaker and many others. We also maintain our own E3D Forum where many people share and collaborate on clever solutions for mounting on various printers. We value the community that use our product and look to support development wherever possible. We're always there to support you in using your HotEnd - whether that means giving advice on public forums, or private email support by our contact system.
Included in every PowerUp add-on
Variable according to customer choice
- 4x Plastfast 3.0x16 screws to attach the fan to the fan duct
- 1x M3x3 socket dome screw and M3 washer to clamp the thermistor
- 1x M3x10 socket dome srew to clamp the heater block around the heater cartridge
Copyright © 2017 E3D-Online.com All Rights Reserved Company Number: 8496321 VAT Number: GB171059715