Contents
- Summary
- Volumes & Dimensions
- Mounting Guidance
- Cable Orientation
- Connections
- Materials
- Upgrade Guide
- Assembly Guide
- Firmware and Printer Config
- Reference CAD
Summary
- Max Printing Temperature: 300°C
- Mass: 25g
- Temperature sensor type: Thermistor, Semitec 104NT-4-R025H42G
- Motor voltage: 12V or 24V
- Wattage: 40W
- Filament Diameter: 1.75mm
- Maximum ambient printing temperature (PLA): 40°C
Volumes & Dimensions
Mounting Guidance
- Mounting type: M3 x 0.5
- Complete mounting instructions and STL files for the Voron printed parts can be found at VoronDesign.com
Cable Orientation
- Turn Revo HeaterCore anti-clockwise to orient cables. Turning clockwise will cause the spring to disengage.
Connections
- Heater: Molex Micro-Fit 3.0, 2 pin horizontal
- Temperature sensor: Molex Micro-Fit 3.0, 2 pin horizontal
- Assembly is supplied with 1m cables to connect to mainboard
Materials
- Heatsink: Aluminium (red anodised)
- HeaterCore: Alumina, Bronze
Upgrade Guide
Please see Voron Stealthburner Docs
Assembly Guide
| A. 1x Voron Heatsink | C. 1x HeaterCore | E. 1x Thermistor extension cable |
| B. 1x Spring | D. 1x Revo Nozzle | F. 1x Heater extension cable |
- Attach the spring to the groove on the bottom of the Heatsink.
- Attach the HeaterCore to the HeatSink and Spring assembly.
- Screw the Nozzle into Heatsink. It should slide freely through the HeaterCore.
- Attach the Heater and Thermistor extension cables.
Firmware and Printer Config
The standard Revo HeaterCore uses the ATC Semitec 104NT-4-R025H42G.
Klipper firmware temperature sensor config docs